# 检查 task_plan.md 中所有阶段是否完成
# 始终以退出码 0 结束 — 使用标准输出报告状态
# 由 Stop 钩子调用以报告任务完成状态

param(
    [string]$PlanFile = "task_plan.md"
)

# issue #195: per-invocation opt-out (PLANNING_DISABLED=1) for one-shot/CI
# sessions that share a cwd with a plan but never opted into it.
if ($env:PLANNING_DISABLED -eq '1') { exit 0 }

if (-not (Test-Path $PlanFile)) {
    Write-Host '[planning-with-files] 未找到 task_plan.md — 没有进行中的规划会话。'
    exit 0
}

# 读取文件内容
$content = Get-Content $PlanFile -Raw

# 计算阶段总数
$TOTAL = ([regex]::Matches($content, "### 阶段")).Count

# 先检查 **状态：** 格式
$COMPLETE = ([regex]::Matches($content, "\*\*状态：\*\* complete")).Count
$IN_PROGRESS = ([regex]::Matches($content, "\*\*状态：\*\* in_progress")).Count
$PENDING = ([regex]::Matches($content, "\*\*状态：\*\* pending")).Count

# 备用：如果未找到 **状态：** 则检查 [complete] 行内格式
if ($COMPLETE -eq 0 -and $IN_PROGRESS -eq 0 -and $PENDING -eq 0) {
    $COMPLETE = ([regex]::Matches($content, "\[complete\]")).Count
    $IN_PROGRESS = ([regex]::Matches($content, "\[in_progress\]")).Count
    $PENDING = ([regex]::Matches($content, "\[pending\]")).Count
}

# 报告状态 — 始终以退出码 0 结束，未完成的任务是正常状态
if ($COMPLETE -eq $TOTAL -and $TOTAL -gt 0) {
    Write-Host ('[planning-with-files] 所有阶段已完成（' + $COMPLETE + '/' + $TOTAL + '）。如果用户有额外工作，请在开始前于 task_plan.md 中新增阶段。')
} else {
    Write-Host ('[planning-with-files] 任务进行中（' + $COMPLETE + '/' + $TOTAL + ' 个阶段已完成）。停止前请更新 progress.md。')
    if ($IN_PROGRESS -gt 0) {
        Write-Host ('[planning-with-files] ' + $IN_PROGRESS + ' 个阶段仍在进行中。')
    }
    if ($PENDING -gt 0) {
        Write-Host ('[planning-with-files] ' + $PENDING + ' 个阶段待处理。')
    }
}
exit 0

#!/usr/bin/env bash
# 检查 task_plan.md 中所有阶段是否完成
# 始终以退出码 0 结束 — 使用标准输出报告状态
# 由 Stop 钩子调用以报告任务完成状态

# issue #195: per-invocation opt-out (PLANNING_DISABLED=1) for one-shot/CI
# sessions that share a cwd with a plan but never opted into it.
[ "${PLANNING_DISABLED:-}" = "1" ] && exit 0

PLAN_FILE="${1:-task_plan.md}"

if [ ! -f "$PLAN_FILE" ]; then
    echo "[planning-with-files] 未找到 task_plan.md — 没有进行中的规划会话。"
    exit 0
fi

# 计算阶段总数
TOTAL=$(grep -c "### 阶段" "$PLAN_FILE" || true)

# 先检查 **状态：** 格式
COMPLETE=$(grep -cF "**状态：** complete" "$PLAN_FILE" || true)
IN_PROGRESS=$(grep -cF "**状态：** in_progress" "$PLAN_FILE" || true)
PENDING=$(grep -cF "**状态：** pending" "$PLAN_FILE" || true)

# 备用：如果未找到 **状态：** 则检查 [complete] 行内格式
if [ "$COMPLETE" -eq 0 ] && [ "$IN_PROGRESS" -eq 0 ] && [ "$PENDING" -eq 0 ]; then
    COMPLETE=$(grep -c "\[complete\]" "$PLAN_FILE" || true)
    IN_PROGRESS=$(grep -c "\[in_progress\]" "$PLAN_FILE" || true)
    PENDING=$(grep -c "\[pending\]" "$PLAN_FILE" || true)
fi

# 默认为 0（如果为空）
: "${TOTAL:=0}"
: "${COMPLETE:=0}"
: "${IN_PROGRESS:=0}"
: "${PENDING:=0}"

# 报告状态（始终以退出码 0 结束 — 未完成的任务是正常状态）
# issue #191: TOTAL=0 -> not phase-structured, stay silent
if [ "$TOTAL" -eq 0 ]; then
    exit 0
fi

if [ "$COMPLETE" -eq "$TOTAL" ] && [ "$TOTAL" -gt 0 ]; then
    echo "[planning-with-files] 所有阶段已完成（$COMPLETE/$TOTAL）。如果用户有额外工作，请在开始前于 task_plan.md 中新增阶段。"
else
    echo "[planning-with-files] 任务进行中（$COMPLETE/$TOTAL 个阶段已完成）。停止前请更新 progress.md。"
    if [ "$IN_PROGRESS" -gt 0 ]; then
        echo "[planning-with-files] $IN_PROGRESS 个阶段仍在进行中。"
    fi
    if [ "$PENDING" -gt 0 ]; then
        echo "[planning-with-files] $PENDING 个阶段待处理。"
    fi
fi
exit 0

# 初始化新会话的规划文件
# 用法：.\init-session.ps1 [项目名称]

param(
    [string]$ProjectName = "project"
)

$DATE = Get-Date -Format "yyyy-MM-dd"

Write-Host "正在初始化规划文件：$ProjectName"

# 如果 task_plan.md 不存在则创建
if (-not (Test-Path "task_plan.md")) {
    @"
# 任务计划：[简要描述]

## 目标
[用一句话描述最终状态]

## 当前阶段
阶段 1

## 各阶段

### 阶段 1：需求与发现
- [ ] 理解用户意图
- [ ] 确定约束条件和需求
- [ ] 将发现记录到 findings.md
- **状态：** in_progress

### 阶段 2：规划与结构
- [ ] 确定技术方案
- [ ] 如有需要创建项目结构
- [ ] 记录决策及理由
- **状态：** pending

### 阶段 3：实现
- [ ] 按计划逐步执行
- [ ] 先将代码写入文件再执行
- [ ] 增量测试
- **状态：** pending

### 阶段 4：测试与验证
- [ ] 验证所有需求已满足
- [ ] 将测试结果记录到 progress.md
- [ ] 修复发现的问题
- **状态：** pending

### 阶段 5：交付
- [ ] 检查所有输出文件
- [ ] 确保交付物完整
- [ ] 交付给用户
- **状态：** pending

## 已做决策
| 决策 | 理由 |
|------|------|

## 遇到的错误
| 错误 | 解决方案 |
|------|---------|
"@ | Out-File -FilePath "task_plan.md" -Encoding UTF8
    Write-Host "已创建 task_plan.md"
} else {
    Write-Host "task_plan.md 已存在，跳过"
}

# 如果 findings.md 不存在则创建
if (-not (Test-Path "findings.md")) {
    @"
# 发现与决策

## 需求
-

## 研究发现
-

## 技术决策
| 决策 | 理由 |
|------|------|

## 遇到的问题
| 问题 | 解决方案 |
|------|---------|

## 资源
-
"@ | Out-File -FilePath "findings.md" -Encoding UTF8
    Write-Host "已创建 findings.md"
} else {
    Write-Host "findings.md 已存在，跳过"
}

# 如果 progress.md 不存在则创建
if (-not (Test-Path "progress.md")) {
    @"
# 进度日志

## 会话：$DATE

### 当前状态
- **阶段：** 1 - 需求与发现
- **开始时间：** $DATE

### 已执行操作
-

### 测试结果
| 测试 | 预期 | 实际 | 状态 |
|------|------|------|------|

### 错误
| 错误 | 解决方案 |
|------|---------|
"@ | Out-File -FilePath "progress.md" -Encoding UTF8
    Write-Host "已创建 progress.md"
} else {
    Write-Host "progress.md 已存在，跳过"
}

Write-Host ""
Write-Host "规划文件已初始化！"
Write-Host "文件：task_plan.md, findings.md, progress.md"

#!/usr/bin/env bash
# 初始化新会话的规划文件
# 用法：./init-session.sh [项目名称]

set -e

PROJECT_NAME="${1:-project}"
DATE=$(date +%Y-%m-%d)

echo "正在初始化规划文件：$PROJECT_NAME"

# 如果 task_plan.md 不存在则创建
if [ ! -f "task_plan.md" ]; then
    cat > task_plan.md << 'EOF'
# 任务计划：[简要描述]

## 目标
[用一句话描述最终状态]

## 当前阶段
阶段 1

## 各阶段

### 阶段 1：需求与发现
- [ ] 理解用户意图
- [ ] 确定约束条件和需求
- [ ] 将发现记录到 findings.md
- **状态：** in_progress

### 阶段 2：规划与结构
- [ ] 确定技术方案
- [ ] 如有需要创建项目结构
- [ ] 记录决策及理由
- **状态：** pending

### 阶段 3：实现
- [ ] 按计划逐步执行
- [ ] 先将代码写入文件再执行
- [ ] 增量测试
- **状态：** pending

### 阶段 4：测试与验证
- [ ] 验证所有需求已满足
- [ ] 将测试结果记录到 progress.md
- [ ] 修复发现的问题
- **状态：** pending

### 阶段 5：交付
- [ ] 检查所有输出文件
- [ ] 确保交付物完整
- [ ] 交付给用户
- **状态：** pending

## 已做决策
| 决策 | 理由 |
|------|------|

## 遇到的错误
| 错误 | 解决方案 |
|------|---------|
EOF
    echo "已创建 task_plan.md"
else
    echo "task_plan.md 已存在，跳过"
fi

# 如果 findings.md 不存在则创建
if [ ! -f "findings.md" ]; then
    cat > findings.md << 'EOF'
# 发现与决策

## 需求
-

## 研究发现
-

## 技术决策
| 决策 | 理由 |
|------|------|

## 遇到的问题
| 问题 | 解决方案 |
|------|---------|

## 资源
-
EOF
    echo "已创建 findings.md"
else
    echo "findings.md 已存在，跳过"
fi

# 如果 progress.md 不存在则创建
if [ ! -f "progress.md" ]; then
    cat > progress.md << EOF
# 进度日志

## 会话：$DATE

### 当前状态
- **阶段：** 1 - 需求与发现
- **开始时间：** $DATE

### 已执行操作
-

### 测试结果
| 测试 | 预期 | 实际 | 状态 |
|------|------|------|------|

### 错误
| 错误 | 解决方案 |
|------|---------|
EOF
    echo "已创建 progress.md"
else
    echo "progress.md 已存在，跳过"
fi

echo ""
echo "规划文件已初始化！"
echo "文件：task_plan.md, findings.md, progress.md"

#!/usr/bin/env python3
"""
planning-with-files 会话恢复脚本

分析上一个会话，查找在最后一次规划文件更新后未同步的上下文。
设计为在 SessionStart 时运行。

用法：python3 session-catchup.py [项目路径]
"""

import json
import sys
import os
from pathlib import Path
from typing import Any, Dict, Iterable, List, Optional, Tuple

try:
    import orjson
except ImportError:
    orjson = None

PLANNING_FILES = ['task_plan.md', 'progress.md', 'findings.md']
MIN_SESSION_BYTES = 5000


def json_loads(line: str) -> Optional[Dict[str, Any]]:
    """Prefer optional orjson while keeping the hook dependency-free."""
    try:
        if orjson is not None:
            data = orjson.loads(line)
        else:
            data = json.loads(line)
    except (ValueError, TypeError, UnicodeDecodeError):
        return None
    return data if isinstance(data, dict) else None


def normalize_for_compare(path_value: str) -> str:
    expanded = os.path.expanduser(path_value)
    try:
        return str(Path(expanded).resolve())
    except (OSError, ValueError):
        return os.path.abspath(expanded)


def normalize_path(project_path: str) -> str:
    """Normalize project path to match Claude Code's internal representation.

    Claude Code stores session directories using the Windows-native path
    (e.g., C:\\Users\\...) sanitized with separators replaced by dashes.
    Git Bash passes /c/Users/... which produces a DIFFERENT sanitized
    string. This function converts Git Bash paths to Windows paths first.
    """
    p = project_path

    # Git Bash / MSYS2: /c/Users/... -> C:/Users/...
    if len(p) >= 3 and p[0] == '/' and p[2] == '/':
        p = p[1].upper() + ':' + p[2:]

    # Resolve to absolute path to handle relative paths and symlinks
    try:
        resolved = str(Path(p).resolve())
        # On Windows, resolve() returns C:\Users\... which is what we want
        if os.name == 'nt' or '\\' in resolved:
            p = resolved
    except (OSError, ValueError):
        pass

    return p


def get_claude_project_dir(project_path: str) -> Path:
    """Resolve Claude Code's project-specific session storage path."""
    normalized = normalize_path(project_path)

    # Claude Code's sanitization: replace path separators and : with -
    sanitized = normalized.replace('\\', '-').replace('/', '-').replace(':', '-')
    sanitized = sanitized.replace('_', '-')
    # Strip leading dash if present (Unix absolute paths start with /)
    if sanitized.startswith('-'):
        sanitized = sanitized[1:]

    return Path.home() / '.claude' / 'projects' / sanitized


def get_sessions_sorted(project_dir: Path) -> List[Path]:
    """Get all session files sorted by modification time (newest first)."""
    sessions = list(project_dir.glob('*.jsonl'))
    main_sessions = [s for s in sessions if not s.name.startswith('agent-')]
    return sorted(main_sessions, key=safe_stat_mtime, reverse=True)


def safe_stat_mtime(path: Path) -> float:
    try:
        return path.stat().st_mtime
    except OSError:
        return 0.0


def is_substantial_session(session: Path) -> bool:
    try:
        return session.stat().st_size > MIN_SESSION_BYTES
    except OSError:
        return False


def read_codex_meta(session_file: Path) -> Optional[Dict[str, Any]]:
    """Read the first session_meta; later meta records may be copied parent context."""
    try:
        with open(session_file, 'r', encoding='utf-8', errors='replace') as f:
            for line in f:
                data = json_loads(line)
                if not data or data.get('type') != 'session_meta':
                    continue
                payload = data.get('payload')
                return payload if isinstance(payload, dict) else None
    except OSError:
        return None
    return None


def codex_meta_cwd(meta: Dict[str, Any]) -> Optional[str]:
    cwd = meta.get('cwd')
    return cwd if isinstance(cwd, str) else None


def find_current_codex_session(sessions: List[Path]) -> Optional[Path]:
    thread_id = os.getenv('CODEX_THREAD_ID', '').strip()
    if not thread_id:
        return None

    for session in sessions:
        if thread_id in session.name:
            return session
    return None


def is_codex_project_session(session: Path, project_cmp: str) -> bool:
    if not is_substantial_session(session):
        return False

    meta = read_codex_meta(session)
    if not meta:
        return False
    source = meta.get('source')
    if isinstance(source, dict) and 'subagent' in source:
        return False
    cwd = codex_meta_cwd(meta)
    return bool(cwd and normalize_for_compare(cwd) == project_cmp)


def get_codex_sessions(project_path: str) -> Iterable[Path]:
    sessions_dir = Path(os.path.expanduser(os.getenv('CODEX_SESSIONS_DIR', '~/.codex/sessions')))
    if not sessions_dir.exists():
        return

    project_cmp = normalize_for_compare(project_path)
    sessions = sorted(sessions_dir.rglob('rollout-*.jsonl'), key=safe_stat_mtime, reverse=True)
    current = find_current_codex_session(sessions)
    if current and is_codex_project_session(current, project_cmp):
        yield current

    for session in sessions:
        if session == current:
            continue
        if is_codex_project_session(session, project_cmp):
            yield session


def get_session_candidates(project_path: str) -> Tuple[str, Iterable[Path]]:
    if '/.codex/' in Path(__file__).resolve().as_posix().lower():
        return 'codex', get_codex_sessions(project_path)

    claude_project_dir = get_claude_project_dir(project_path)
    if claude_project_dir.exists():
        return 'claude', get_sessions_sorted(claude_project_dir)
    return 'claude', []


def parse_session_messages(session_file: Path) -> List[Dict[str, Any]]:
    """Parse all messages from a session file, preserving order."""
    messages = []
    with open(session_file, 'r', encoding='utf-8', errors='replace') as f:
        for line_num, line in enumerate(f):
            data = json_loads(line)
            if data is not None:
                data['_line_num'] = line_num
                messages.append(data)
    return messages


def planning_file_from_path(path_value: Any) -> Optional[str]:
    if not isinstance(path_value, str):
        return None
    for pf in PLANNING_FILES:
        if path_value.endswith(pf):
            return pf
    return None


def planning_file_from_paths(paths: Iterable[Any]) -> Optional[str]:
    matches = {pf for path in paths if (pf := planning_file_from_path(path))}
    for pf in PLANNING_FILES:
        if pf in matches:
            return pf
    return None


def codex_planning_update(payload: Dict[str, Any]) -> Optional[str]:
    """Use Codex's structured apply_patch result instead of parsing tool text."""
    if payload.get('type') != 'patch_apply_end' or payload.get('success') is not True:
        return None
    changes = payload.get('changes')
    return planning_file_from_paths(changes.keys()) if isinstance(changes, dict) else None


def find_last_planning_update(messages: List[Dict[str, Any]]) -> Tuple[int, Optional[str]]:
    """
    Find the last time a planning file was written/edited.
    Returns (line_number, filename) or (-1, None) if not found.
    """
    last_update_line = -1
    last_update_file = None

    for msg in messages:
        line_num = msg.get('_line_num')
        if not isinstance(line_num, int):
            continue
        msg_type = msg.get('type')

        if msg_type == 'assistant':
            content = msg.get('message', {}).get('content', [])
            if isinstance(content, list):
                for item in content:
                    if item.get('type') == 'tool_use':
                        tool_name = item.get('name', '')
                        tool_input = item.get('input', {})
                        if not isinstance(tool_input, dict):
                            tool_input = {}

                        if tool_name in ('Write', 'Edit'):
                            planning_file = planning_file_from_path(tool_input.get('file_path', ''))
                            if planning_file:
                                last_update_line = line_num
                                last_update_file = planning_file

        elif msg_type == 'event_msg':
            payload = msg.get('payload')
            if isinstance(payload, dict):
                planning_file = codex_planning_update(payload)
                if planning_file:
                    last_update_line = line_num
                    last_update_file = planning_file

    return last_update_line, last_update_file


def text_content(content: Any) -> str:
    if isinstance(content, str):
        return content
    if not isinstance(content, list):
        return ''
    return '\n'.join(
        item.get('text', '')
        for item in content
        if isinstance(item, dict) and isinstance(item.get('text'), str)
    )


def parse_codex_tool_args(payload: Dict[str, Any]) -> Tuple[Dict[str, Any], str]:
    raw_args = payload.get('arguments', payload.get('input', ''))
    if isinstance(raw_args, dict):
        return raw_args, json.dumps(raw_args, ensure_ascii=True)
    if not isinstance(raw_args, str):
        return {}, ''
    decoded = json_loads(raw_args)
    return (decoded, raw_args) if isinstance(decoded, dict) else ({}, raw_args)


def summarize_codex_tool(payload: Dict[str, Any]) -> str:
    tool_name = payload.get('name', 'tool')
    tool_args, raw_args = parse_codex_tool_args(payload)
    if tool_name == 'exec_command':
        command = tool_args.get('cmd', raw_args)
        if isinstance(command, str):
            return f"exec_command: {command[:80]}"
    return str(tool_name)


def extract_messages_after(messages: List[Dict[str, Any]], after_line: int) -> List[Dict[str, Any]]:
    """Extract conversation messages after a certain line number."""
    result = []
    for msg in messages:
        line_num = msg.get('_line_num')
        if not isinstance(line_num, int) or line_num <= after_line:
            continue

        msg_type = msg.get('type')
        is_meta = msg.get('isMeta', False)

        if msg_type == 'user' and not is_meta:
            content = text_content(msg.get('message', {}).get('content', ''))

            if content:
                if content.startswith(('<local-command', '<command-', '<task-notification')):
                    continue
                if len(content) > 20:
                    result.append({'role': 'user', 'content': content, 'line': line_num})

        elif msg_type == 'assistant':
            msg_content = msg.get('message', {}).get('content', '')
            text = text_content(msg_content)
            tool_uses = []

            if isinstance(msg_content, list):
                for item in msg_content:
                    if isinstance(item, dict) and item.get('type') == 'tool_use':
                        tool_name = item.get('name', '')
                        tool_input = item.get('input', {})
                        if not isinstance(tool_input, dict):
                            tool_input = {}
                        if tool_name == 'Edit':
                            tool_uses.append(f"Edit: {tool_input.get('file_path', 'unknown')}")
                        elif tool_name == 'Write':
                            tool_uses.append(f"Write: {tool_input.get('file_path', 'unknown')}")
                        elif tool_name == 'Bash':
                            cmd = tool_input.get('command', '')[:80]
                            tool_uses.append(f"Bash: {cmd}")
                        else:
                            tool_uses.append(f"{tool_name}")

            if text or tool_uses:
                result.append({
                    'role': 'assistant',
                    'content': text[:600] if text else '',
                    'tools': tool_uses,
                    'line': line_num
                })

        elif msg_type == 'response_item':
            payload = msg.get('payload')
            if not isinstance(payload, dict):
                continue

            payload_type = payload.get('type')
            if payload_type == 'message':
                role = payload.get('role')
                if role not in ('user', 'assistant'):
                    continue
                content = text_content(payload.get('content'))
                if role == 'user':
                    if content.startswith(('<local-command', '<command-', '<task-notification')):
                        continue
                    if len(content) > 20:
                        result.append({'role': 'user', 'content': content, 'line': line_num})
                elif content:
                    result.append({
                        'role': 'assistant',
                        'content': content[:600],
                        'tools': [],
                        'line': line_num
                    })
            elif payload_type in ('function_call', 'custom_tool_call'):
                result.append({
                    'role': 'assistant',
                    'content': '',
                    'tools': [summarize_codex_tool(payload)],
                    'line': line_num
                })

    return result


def main():
    project_path = sys.argv[1] if len(sys.argv) > 1 else os.getcwd()

    # Check if planning files exist (indicates active task)
    has_planning_files = any(
        Path(project_path, f).exists() for f in PLANNING_FILES
    )
    if not has_planning_files:
        # No planning files in this project; skip catchup to avoid noise.
        return

    runtime_name, sessions = get_session_candidates(project_path)

    # Find a substantial previous session
    target_session = None
    for session in sessions:
        if runtime_name == 'claude' and not is_substantial_session(session):
            continue
        target_session = session
        break

    if not target_session:
        return

    messages = parse_session_messages(target_session)
    last_update_line, last_update_file = find_last_planning_update(messages)

    # No planning updates in the target session; skip catchup output.
    if last_update_line < 0:
        return

    # Only output if there's unsynced content
    messages_after = extract_messages_after(messages, last_update_line)

    if not messages_after:
        return

    # Output catchup report
    print("\n[planning-with-files] 检测到会话恢复")
    print(f"上一个会话：{target_session.stem}")
    print(f"运行环境：{runtime_name}")

    print(f"最后规划更新：{last_update_file} at message #{last_update_line}")
    print(f"未同步消息：{len(messages_after)}")

    print("\n--- 未同步的上下文 ---")
    assistant_label = 'CODEX' if runtime_name == 'codex' else 'CLAUDE'
    for msg in messages_after[-15:]:
        if msg['role'] == 'user':
            print(f"用户：{msg['content'][:300]}")
        else:
            if msg.get('content'):
                print(f"{assistant_label}: {msg['content'][:300]}")
            if msg.get('tools'):
                print(f"  工具：{', '.join(msg['tools'][:4])}")

    print("\n--- 建议 ---")
    print("1. 运行：git diff --stat")
    print("2. 读取：task_plan.md、progress.md、findings.md")
    print("3. 根据上述上下文更新规划文件")
    print("4. 继续执行任务")


if __name__ == '__main__':
    main()

# 发现与决策

## 需求
-

## 研究发现
-

## 技术决策
| 决策 | 理由 |
|------|------|
|      |      |

## 遇到的问题
| 问题 | 解决方案 |
|------|---------|
|      |         |

## 资源
-

## 视觉/浏览器发现
<!-- 关键：每执行2次查看/浏览器操作后必须更新此部分 -->
<!-- 多模态内容必须立即以文本形式记录 -->
-

---
*每执行2次查看/浏览器/搜索操作后更新此文件*
*防止视觉信息丢失*

# 进度日志

## 会话：[日期]

### 阶段 1：[标题]
- **状态：** in_progress
- **开始时间：** [时间戳]
- 执行的操作：
  -
- 创建/修改的文件：
  -

### 阶段 2：[标题]
- **状态：** pending
- 执行的操作：
  -
- 创建/修改的文件：
  -

## 测试结果
| 测试 | 输入 | 预期结果 | 实际结果 | 状态 |
|------|------|---------|---------|------|
|      |      |         |         |      |

## 错误日志
| 时间戳 | 错误 | 尝试次数 | 解决方案 |
|--------|------|---------|---------|
|        |      | 1       |         |

## 五问重启检查
| 问题 | 答案 |
|------|------|
| 我在哪里？ | 阶段 X |
| 我要去哪里？ | 剩余阶段 |
| 目标是什么？ | [目标声明] |
| 我学到了什么？ | 见 findings.md |
| 我做了什么？ | 见上方记录 |

---
*每个阶段完成后或遇到错误时更新此文件*

# 任务计划：[简要描述]

## 目标
[用一句话描述最终状态]

## 当前阶段
阶段 1

## 各阶段

### 阶段 1：需求与发现
- [ ] 理解用户意图
- [ ] 确定约束条件和需求
- [ ] 将发现记录到 findings.md
- **状态：** in_progress

### 阶段 2：规划与结构
- [ ] 确定技术方案
- [ ] 如有需要创建项目结构
- [ ] 记录决策及理由
- **状态：** pending

### 阶段 3：实现
- [ ] 按计划逐步执行
- [ ] 先将代码写入文件再执行
- [ ] 增量测试
- **状态：** pending

### 阶段 4：测试与验证
- [ ] 验证所有需求已满足
- [ ] 将测试结果记录到 progress.md
- [ ] 修复发现的问题
- **状态：** pending

### 阶段 5：交付
- [ ] 检查所有输出文件
- [ ] 确保交付物完整
- [ ] 交付给用户
- **状态：** pending

## 关键问题
1. [待回答的问题]
2. [待回答的问题]

## 已做决策
| 决策 | 理由 |
|------|------|
|      |      |

## 遇到的错误
| 错误 | 尝试次数 | 解决方案 |
|------|---------|---------|
|      | 1       |         |

## 备注
- 随着进度更新阶段状态：pending → in_progress → complete
- 做重大决策前重新读取此计划（注意力操纵）
- 记录所有错误，避免重复